User guide
Table Of Contents
- Send Feedback
- Before You Begin
- Chapter 1 - About the Vehicle Mount Computer
- Chapter 2 - Understand the User Interface and Intermec Applications
- Chapter 3 - Manage the Computer
- Chapter 4 - Configure the Computer
- Chapter 5 - Troubleshoot and Maintain the Computer
- Chapter 6 - Upgrade the CV61 Vehicle Mount Computer
- Appendix A - Specifications and Default Settings
- Appendix B - ScanNGo Wi-Fi Configuration Bar Codes
Chapter 6 — Upgrade the CV61 Vehicle Mount Computer
CV61 Vehicle Mount Computer (Windows XP) User Guide 77
8 Install the new hard drive and close the CV61. Use the next
illustration for the tightening sequence for the back cover. Tighten
the screws to a final value of 0.73 Nm (6.5 lbf-in).
9 Reconnect the power cable.
10 Install Microsoft Windows XP.
11 Install the Intermec system software. For more information, see
“Update the System Software” on page 27.
5
1
7
4
3
2
8
6