User Manual
Table Of Contents
- Before You Begin
- Chapter 1 — About the Printers
- Chapter 2 — Set Up the Printer
- Adjust the Media Holders
- Load Media for Straight-Through Printing
- Load Media for Cut-Off Printing
- Load Media for the Label Dispenser
- Load Ribbon
- Use External Media
- Connect the Printer to Power
- Use the Setup Wizard
- Print Print Quality Labels from the Main Menu
- Print Configuration Labels from the Main Menu
- Media Settings
- Chapter 3 — Connect the Printer
- Chapter 4 — Configure the Printer
- Chapter 5 — Troubleshoot the Printer
- Chapter 6 — Maintain the Printer
- Appendix A — Specifications and Default Settings
- Printer Specifications
- Supported Bar Code Symbologies
- Bluetooth Settings
- Display and Audio Settings
- Error, Information, and Warning Alert Settings
- Ethernet Settings
- General System Settings
- Media Settings
- Print Quality Settings
- Serial Port Settings
- System I/O Settings
- System Network Services
- System Maintenance Alert Settings
- Wireless 802.11 General Settings
- Wireless 802.11 Network Settings
- Wireless 802.11 Security Settings
- Appendix B — Print Labels with INPrint
Appendix A — Specifications and Default Settings
PC23 and PC43 Desktop Printer User Manual 147
Media Settings
This section describes media settings for the printer. To view these
settings:
• From the printer Main Menu, select Settings > Printing > Media.
• From the printer web page, click the Configure tab > Printing >
Media.
Note: If you are using an icon printer that is not on a network, you
need to use PrintSet through a USB connection to configure media
settings.
Setting Description Default
Media Type Selects the type of media that is loaded in the printer. Media With Gaps
Print Method Selects the method of printing that the printer is using. Ribbon (TTR) for
thermal transfer
printers, or No Ribbon
(DT) for direct thermal
printers
Media Width Sets the width of the printable area measured from the
media margin (X) across the printhead. Unit of
measurement is defined in the Unit of Measure
parameter.
Variable
INTERMEC
6001 36th Ave W
Everett WA 98203
.FEJBXJEUI