User Manual
Table Of Contents
- Before You Begin
- Chapter 1 — About the Printers
- Chapter 2 — Set Up the Printer
- Adjust the Media Holders
- Load Media for Straight-Through Printing
- Load Media for Cut-Off Printing
- Load Media for the Label Dispenser
- Load Ribbon
- Use External Media
- Connect the Printer to Power
- Use the Setup Wizard
- Print Print Quality Labels from the Main Menu
- Print Configuration Labels from the Main Menu
- Media Settings
- Chapter 3 — Connect the Printer
- Chapter 4 — Configure the Printer
- Chapter 5 — Troubleshoot the Printer
- Chapter 6 — Maintain the Printer
- Appendix A — Specifications and Default Settings
- Printer Specifications
- Supported Bar Code Symbologies
- Bluetooth Settings
- Display and Audio Settings
- Error, Information, and Warning Alert Settings
- Ethernet Settings
- General System Settings
- Media Settings
- Print Quality Settings
- Serial Port Settings
- System I/O Settings
- System Network Services
- System Maintenance Alert Settings
- Wireless 802.11 General Settings
- Wireless 802.11 Network Settings
- Wireless 802.11 Security Settings
- Appendix B — Print Labels with INPrint
Chapter 1 — About the Printers
8 PC23 and PC43 Desktop Printer User Manual
About the Ready Screen
After you turn the printer on, the Ready screen appears when the
printer is finished starting up and is ready to print.
PC23 and PC43 Ready Screen
By default, the bottom of the screen shows the printer command
language, the IP address, and the time and date. You can customize the
screen as necessary to show different kinds of information.
LCD Interface Navigation Button Descriptions
Button Description
Menu/Home button. From the Ready screen, press to toggle
between the Ready screen and the printer Main Menu.
Directional pad: Press , , , or to move the selection
highlight to another item. Press to select the highlighted item
and to save settings in a menu or list.
Back button. Press to return to the previous menu or page.
Print/Feed button. Press to begin printing, or to feed a single
label.
Fingerprint
10.200.27.89
01/04/2012
12:00
®
Ready
Note: Icons for Wi-Fi and Bluetooth status appear only when the
optional Wi-Fi/Bluetooth module is installed. The IP address appears
when the printer is connected to an Ethernet or wireless network.