User Manual
Table Of Contents
- Before You Begin
- Chapter 1 — About the Printers
- Chapter 2 — Set Up the Printer
- Adjust the Media Holders
- Load Media for Straight-Through Printing
- Load Media for Cut-Off Printing
- Load Media for the Label Dispenser
- Load Ribbon
- Use External Media
- Connect the Printer to Power
- Use the Setup Wizard
- Print Print Quality Labels from the Main Menu
- Print Configuration Labels from the Main Menu
- Media Settings
- Chapter 3 — Connect the Printer
- Chapter 4 — Configure the Printer
- Chapter 5 — Troubleshoot the Printer
- Chapter 6 — Maintain the Printer
- Appendix A — Specifications and Default Settings
- Printer Specifications
- Supported Bar Code Symbologies
- Bluetooth Settings
- Display and Audio Settings
- Error, Information, and Warning Alert Settings
- Ethernet Settings
- General System Settings
- Media Settings
- Print Quality Settings
- Serial Port Settings
- System I/O Settings
- System Network Services
- System Maintenance Alert Settings
- Wireless 802.11 General Settings
- Wireless 802.11 Network Settings
- Wireless 802.11 Security Settings
- Appendix B — Print Labels with INPrint
Chapter 5 — Troubleshoot the Printer
116 PC23 and PC43 Desktop Printer User Manual
4 For an icon printer, watch the icon panel. When the bottom row of
icons turns off, press and hold , and release when the
Ready-to-Work indicator begins flashing.
For an LCD printer, watch the startup progress bar. When the bar
is halfway across the screen, press and hold , and release
when the first screen of the Startup Wizard appears.
5 Close the printer lid. The defaults are restored. For an LCD printer,
follow the instructions in the Startup Wizard.
Restore Defaults from the Printer Web Page
If the printer is connected to an Ethernet or wireless network, you can
restore default settings from the printer web page.
1 On your desktop PC, start a web browser.
2 In the address field, type the printer IP address and then press
Enter. The printer web page appears.
3 Click login in the upper right corner of the screen. The Login page
appears.
4 Type your Username and Password in the entry fields and then
click Login. The default username is itadmin and the default
password is pass.