User Manual

Chapter 3 — Connect the Printer
PC23 and PC43 Desktop Printer User Manual 81
Setting Description Default
Security Type Selects the protocol the radio uses to
verify its identity and makes sure that it is
authorized to communicate on the
wireless network.
None
Association Selects the security method that the radio
uses to get access to the wireless network.
Open/WEP
Pre-Shared Key Defines the passphrase that allows the
radio to authenticate over the wireless
network (for both WPA and WPA2
security). Range is 8 to 64 characters.
None
Network Key
Index
Selects the active network key to use for
WEP security. Range is 1 to 4.
1
Network Key 1,
Network Key 2,
Network Key 3,
Network Key 4
Defines a network key that is used for
WEP security. Keys are entered in ASCII or
hexadecimal (preceded by 0x) format.
Empty string
User Name Sets the name that the printer uses when
logging in to the network. Range is 1 to 96
characters.
None
Password Sets the password that the printer uses
when logging in to the network. Range is
1 to 96 characters.
None
Anonymous
Name
Sets the outer EAP user name that the
printer uses for logging in to the network.
Maximum length is 96 characters.
Empty string
Inner
Authentication
Selects the authentication method that is
used when the EAP type is EAP-FAST,
PEAP, or TTLS.
MSCHAPv2
CA Certificate Sets the name of the Certificate Authority
(CA) that verifies the server certificate.
This CA should be the same one that was
used to sign the server certificate.
intermec.pem
Client Certificate Sets the name of the client certificate the
printer uses to authenticate to the
network using EAP-TLS. Maximum
length is 128 characters.
None
Client Key Sets the private key the printer uses for
EAP-TLS. Maximum length is 128
characters. Use the certinstall.sh script to
install the certificate correctly.
None