User`s manual

Appendix A — Specifications
142 PF2i and PF4i Mid-Range Printer User’s Manual
Tickets With Black Mark (Mark Stock)
LSS Detection Position (c)
This position is variable. For help, see “Adjusting the Label Stop
Sensor” on page 107.
Black Mark Width (d)
The detectable width of the black mark should be at least 5.0 mm
(0.2 in) on either side of the LSS detection point.
PF2i Media Width Including Liner (a)
Measurement Value
Maximum 60 mm (2.36 in)
Minimum, standard guides 25.0 mm (1.00 in)
Minimum, quick-load guides 40 mm (1.57 in)
PF4i Media Width Including Liner (a)
Measurement Value
Maximum 114.3 mm (4.50 in)
Minimum, standard guides 25.0 mm (1.00 in)
Minimum, quick-load guides 40 mm (1.57 in)
Minimum, wide quick-load guides 80.0 mm (3.15 in)
Copy Length (b)
Measurement Value
Maximum Dependent on SDRAM size
Minimum 20 mm (0.8 in)
Black Mark Length (e)
Measurement Value
Maximum 21.3 mm (0.83 in)
Common 12.5 mm (0.5 in)
Minimum 5.0 mm (0.2 in)