Operation Manual

Loop Speaker
Operation Manual
Contents:
1. Instructions
1.1 Charging the speaker
1.2 Bluetooth Connectivity
1.3 LED light codes
2. Specifications
3. Diagram
2. Specifications
1. Instructions
1.1 Charging the speaker
Connect the included USB cable to a computer USB port or USB charger,
and to the speaker mini-USB port.
When charging, the LED will illuminate in Red. When battery is fully
powered,
the LED will turn off.
1. 2 Setting up Bluetooth Connectivity
(before setting up, make sure the speaker is turned on, fully charged, and
not already connected to another device)
TO PAIR TO AN ANDROID PHONE
1. Open Settings
2. Open Wireless and Network
3. Open Bluetooth Settings
4. Turn Bluetooth on (if it is off)
5. Select Search for Devices
6. Select TOUCHPOINT
7. Touch Connect
TO PAIR TO AN IPHONE OR IPAD
1. Open Settings
2. Turn Bluetooth on (if it is off)
3. Select TOUCHPOINT found under
My Devices
4. Once paired: it will say Connected
next to the device name
TO PAIR TO A MAC OS COMPUTER
1. Open System Preferences
2. Open Bluetooth
3. Click the + button to add a Bluetooth
device
4. Select TOUCHPOINT
5. Click Continue - the computer will
pair with the device. If asked, input
the passcode 0000
Off / Discharged No light
On / in pairing mode Blinking blue light
On / connected to device Blue light (no blinking)
TO PAIR TO A WINDOWS OS
COMPUTER
1. Open Devices and printers
2. Click Add a device
3. Select UGO or Bluetooth headset
4. Click Next
5. Input Pass code 0000 if necessary
1.3 LED Light :
Output : 2.2W
Bluetooth version : Compatible with V1.1 through v2.1
Frequency : 100Hz - 20KHz
Max sound level (dB) : >85db or ≥ 90 2db
Charging time : 1.5hrs
Play time at full volume : continuously approx. 2hrs
THD (Distortion level) : < 0.5%
DC input : DC5V
Battery : Li-ion
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
3. Diagram
(I): On
(O): Off
Mini USB
plug
charging:
Mini USB
port
LED light
USB plug
72mm72mm
72mm