ASSEMBLY INSTRUCTIONS Description : MISSION JUVENILE CHAIR : 263 Item No. ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Short bolt 1 2 (M6x40mm) Sketch 2 (M6x50mm) Flat Washer Screw 3 4 4 (ɸ6.5x14mm) (M4x30mm) Lock Washer 5 Qty Long bolt 4 3 Description Curve Washer 4 6 (ɸ6.5x11mm) 2 (12x16mm) Allen Key 7 1 (4mm) STEP 1 Attach Side Aprons (C) to the Back (A) with Short bolts (1), and Washers (4) and (5).
STEP 2 Attach Front frame (B) to Side Aprons (from Step 1) with bolts (2) and Curve Washers (6). Tighten with the Allen Key (7) STEP 3 Attach the Seat (D) to top of the seat frame (from Step 2) by using Screws (3). Tighten with a screw driver. ITEM NO.