Instructions / Assembly

ITEM NO.: BD-8003
REVISED APR 03, 2024
Printed in Vietnam
- 11 -
Attach brackets (13) to the back of the unit with screws (11) through the smaller holes in the brackets
as shown below.
Important!
Properly attach the other brackets (13) to the wall in an area of drywall or plaster with a wood stud:
Mark the attachment point(s) with a pencil at the appropriate height positioned over the wood stud(s)
in the wall.
Place the unit into position so both mounting brackets are vertically in line.
Properly attach the other brackets (13) to the wall stud with screws (12) through the smaller holes as
shown below.
Lace the end of flat nylon ties (14) through the larger holes in each mounting bracket. Bring both ends
together and slide the flat ends through the locking ends and draw it through until all slack is
removed.
Confirm that the strap is securely laced and locked.
STEP 10