Instructions / Assembly

ITEM NO.: BD-8003
REVISED APR 03, 2024
Printed in Vietnam
- 6 -
STEP 2
Attach bottom frame (B) to side panel (C) with bolt (2) and u-washer (3), bolts (1) and washers (4) and
(5) as shown below. Tighten with Allen key (6).
Insert back rail (E) and anti-tip board (G) into side panel (C). Slide back panels (F) into the grooves as
shown below.
STEP 3
Attach side panel (D) to top (A) and bottom frame (B) with bolt (2) and u-washer (3), bolts (1) and
washers (4) and (5) as shown below. Tighten with Allen key (6).
Attach back rail (E) to the unit with screws (7) as shown below .Tighten with a screwdriver.