ASSEMBLY INSTRUCTIONS Description Item No. : DOUBLE X BACK BENCH 38X18X37.5H : BE-1 ITEMNO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Qty A Seat 1 B C Bottom frame 1 D E Crossbar Sketch NO Description Side frame (L & R) Back Qty Sketch 2 1 1 HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging.
STEP 1 Attach right side frame (B) to seat (A) with bolts (1), and washers (2) and (3) as shown below. Tighten with the Allen key (6). STEP 2 Insert back (D) and cross bar (E) into side frames (B), then attach left side frame (B) to seat (A) with bolts (1), and washers (2) and (3) as shown below. Tighten with the Allen key (6). ITEMNO.
STEP 3 Attach back (D) to side frames (B) with screws (4) as shown below. Tighten with a screwdriver. Then put wood buttons (5) over screws to cover them. STEP 4 Carefully place the bottom frame (C) on the stretchers of side frames (B) as shown below. Then attach the bottom frame (C) to the unit with screws (4). Tighten with a screwdriver. ITEMNO.
