ASSEMBLY INSTRUCTIONS Description Item No. : BEDSIDE BENCH : BE-4 ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Qty A Front frame B Sketch NO Description Qty 1 G Seat frame 1 Back frame 1 J Front drawer 2 c Side frame 2 K Side drawer (L&R) 4 D Patition 1 L Back drawer 2 E Rail 2 M Bottom drawer 2 F Seat 1 N Drawer support 2 ITEM NO.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Bolt ( M6x50mm) 3 Sketch NO Description Qty 10 2 Lock Washer (6.5x11mm) 10 Flat Washer (6.
STEP 2 Attach side panel (C) to front frame (A) and back panel (B) with bolts (1), and washers (2) and (3) as shown below. Tighten with allen key (4). STEP 3 Attach the seat (F) to seat frame (G) with screws (5) .Tighten with a screwdriver. ITEM NO.
STEP 4 Attach seat frame (from Step 3) to unit with screws (5). Tighten with a screwdriver. STEP 5 Attach drawer sides (K) to the drawer front (J) and drawer back (L) with screws (5) as shown below. Tighten with a screwdriver. Slide the drawer bottom panel (M) into the grooves as shown below. Attach drawer support (N) to the drawer front (J) and drawer back (L) with screws (5). Tighten with a screwdriver. Attach the knob (6) to the drawer front with pan head screw (7). Tighten with a screwdriver. ITEM NO.
STEP 6 Put the drawers into the unit. ITEM NO.
