ASSEMBLY INSTRUCTIONS Description : MISSION END TABLE Item No. : BJ6TE Printed in Vietnam ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Long bolt (M6x35mm) 3 Flat washer (∅6.5x19mm) Sketch NO Description 8 2 Spring washer 8 4 Allen key (4X80mm) (∅6.5x11mm) Qty Sketch 8 1 STEP 1 Attach side frames (C) to top (A) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (4). Printed in Vietnam ITEM NO.
STEP 2 Attach bottom self (B) to side frames (C) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (4). Printed in Vietnam ITEM NO.
