ASSEMBLY INSTRUCTIONS Description: DOUBLE X BACK CHAIR WITH WOOD SEAT : C-20 Item No.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Short bolt 1 2 (M6x40mm) Sketch 4 (M6x60mm) Long bolt Screw 4 4 (M6x80mm) 10 (M4x35mm) Lock Washer Flat Washer 11 5 Qty Medium bolt 3 3 Description 11 6 (Φ6.5x 11mm) (Φ6.
STEP 2 Attach Middle stretcher (F) to Side Stretchers (E) with Screws (4). Tighten with a screwdriver. STEP 3 Attach Front Legs (D) to the seat frame.Using bolts (2), and Washers (5) and (6). Tighten with Allen Key (7). Place Side Stretchers (E) (from step 2) between front and back legs, use the screwdriver to tighten the screws (4) as shown below.
STEP 4 Attach the Seat (C) to top of the seat frame (from Step 3) by using Screws (4), tighten with a screw driver.
