Instructions / Assembly

ITEM

OR T

30RT

AND

30P ( PACKED IN SEPARATE BOX

)

REVISED AUG 27, 2014

Printed in Vietnam

- 1 -

ASSEMBLY INSTRUCTIONS

Description : ROUND TABLE TOP

Item No: T-36RT OR T-30RT AND T-30P

(PACKED IN SEPARATE BOX)

PAGE 1
ASSEMBLY INSTRUCTIONS Description : Item No: ROUND TABLE TOP T-36RT OR T-30RT AND T-30P (PACKED IN SEPARATE BOX) ITEM NO: T-36RT OR T-30RT AND T-30P ( PACKED IN SEPARATE BOX ) REVISED AUG 27, 2014 -1- Printed in Vietnam
PAGE 2
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PAGE 3
STEP 1 Attach the mounting plate (B) to the pedestal (D), with bolts (1), washers (2) and (4) as shown below. Tighten with Allen key (5). STEP 2 Carefully put the pedestal on the bottom side of the table top, attach the top (A) to mounting plate (B) with bolts (1), washers (3) and (4) as shown below. Tighten with Allen key (5).