Instructions / Assembly

ITEM
NO
:
S
-
402
REVISED AUG 04, 2012
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Short bolt
(M6x40mm)
3
2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6x70mm)
4
4
Screw
(M4x35mm)
10
5
Lock washer
( Φ6.5xΦ11mm)
11
6
Flat washer
( Φ6.5xΦ19mm)
11
7
Allen key
(4mm)
1
STEP 1
Attach seat frame (B) to the back (A) with bolts (3) and (1), washers (6) and (5). Tighten with Allen key
(7) as shown below.
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.