Instructions / Assembly

ITEM

REVISED JUL 23, 2012

Printed in Vietnam

- 1 -

Description

Item No.

: 6 IN PEDESTAL EXTENSION

: T-6P

ASSEMBLY INSTRUCTIONS

PAGE 1
ASSEMBLY INSTRUCTIONS Description Item No.
PAGE 2
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased.
PAGE 3
STEP 1 Attach mounting plate (B) and pedestal extension (E) to the column (D) with long bolts (10), short bolts (1), washers (2) , (4) , (11) and (12) as shown below. Tighten with allen key (9). STEP 2 Attach pedestal extension (E) to the column (D), with long bolts (10 ), washers (11) and (12) as shown below. Tighten with allen key (9). Attach mounting plate (B) and pedestal extension (E) to the column (D), with long bolts (10), short bolts (1), washers (2), (4) , (11) and (12) as shown below.
PAGE 4
STEP 3 Carefully put the pedestal block on the bottom side of the table top, attach the top (A) to mounting plate (B) with bolts (1) washers (3) and (4) .Tighten with the allen key (9).