ASSEMBLY INSTRUCTIONS Description : HAMPTON END TABLE Item No. : OT-70E ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
HARDWARE LIST When unpacking, please carefully not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Q’ty 1 Bolt (M6x35mm) 8 2 8 4 3 Lock washer (6.5x11mm) Sketch NO Description Flat washer (6.5x16mm) Allen Key (4 x 80mm) Q’ty Sketch 8 1 STEP 1 Attach side frame (C) to the top (A) with bolt (1), washer (2) and (3) as shown below. Tighten with Allen key (4).
