ASSEMBLY INSTRUCTIONS Description : LAMP TABLE Item : OT-92 Printed in Vietnam ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PART LIST When unpacking, please carefully not to discard any parts with the packaging. Before continuing, please make sure you have all of the following parts: NO Description Qty A Top 1 B C Side frame (L-R) Bottom shelf Sketch NO Description Qty D Back 1 E Top crossbar 1 F Bottom crossbar 1 G Drawer 2 Sketch 2 1 HARDWARE LIST When unpacking, please carefully not to discard any parts with the packaging.
STEP 1 Attach back (D) and bottom shelf (C) to side frames (B) with bolts (1), washers (2) and (3) as shown below. Tighten with Allen key (4). Attach top crossbar (E) and bottom crossbar (F) to side frames (B) with screws (5) as shown below. Tighten with a screwdriver. Printed in Vietnam ITEM NO.
STEP 2 Attach the unit to top (A) with screws (5) as shown below. Tighten with a screwdriver. STEP 3 Insert drawer (G) into the unit. Attach knob (6) to the drawer front with pan head screws (7) as shown below. Tighten with a screwdriver. Printed in Vietnam ITEM NO.
