Manualshelf

Instructions / Assembly

ManualsBrandsInternational Concepts ManualsBar StoolsSeattle 24 in. Unfinished Wood Bar Stool
1234
ITEM NO.: S
-
112
REVISED APR 05, 2013
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Q
ty
Sketch
NO
Description
Q
ty
Sketch
1
Short bolt
( M6x40mm)
3
2
Long bolt
(M6x80mm)
4
3
Medium bolt
(M6x60mm)
4
4
Wood Screw
(M4x35mm)
10
5
Lock Washer
(6.5x11mm)
11
6
Flat Washer
(6.5x19mm)
11
7
Allen Key
(4x80mm)
1
STEP 1
Attach seat frame (B) to the back (A) with bolts (2) and (1), washers (5) and (6). Tighten with Allen key
(7) as shown below.
Note: DO NOT tighten any of the bolts, until the stool is assembled, then put on a flat level surface to
make sure the stool is level and then tighten the bolts.