ASSEMBLY INSTRUCTIONS Description : 30 IN CANYON STOOL RTA : S - 483 Item No.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
HARDWARE LIST When unpacking, please carefully not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Short bolt ( M6 x 40mm) 3 Sketch NO Description Qty 3 2 Medium bolt (M6 x 60mm) 4 Long bolt (M6 x 80mm) 4 4 Wood Screw (M4 x 35mm) 14 5 Lock Washer (6.5 x 11mm) 11 6 Flat Washer (6.
STEP 2 Attach front legs (D) to the seat frame (B) with bolts (2), and washers (5) and (6) as shown below. Tighten with Allen key (7). Place side stretchers (E) and (F) and front stretcher (G) between front and back legs, attach with screws (4) as shown below. Tighten with a screwdriver. STEP 3 Attach the seat (C) to top of the seat frame (B) with screws (4). Tighten with a screwdriver.