ASSEMBLY INSTRUCTIONS Description Item No. : VERONA STOOL : S-1702 ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
HARDWARE LIST When unpacking, please carefully not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Short bolt 1 2 ( M6x40mm) Sketch 4 (M6x60mm) Long bolt Wood Screw 4 4 (M6x80mm) 10 (M4x35mm) Lock Washer 5 Qty Medium bolt 3 3 Description Flat Washer 11 6 ((6.5x11mm) 11 ((6.
STEP 2 Attach front legs (D) to the seat frame with bolts (2), and washers (5) and (6).Tighten with allen key (7). Place side stretchers (E) and front stretcher (F) between front and back legs (D), attach with screws (4) as shown below. Tighten with screwdriver. STEP 3 Attach the seat (C) to top of the seat frame (B) by using screws (4). Tighten with a screwdriver. ITEM NO.
