ASSEMBLY INSTRUCTIONS Description Item No. : 32 X 12 X 36 HIGH BOOK CASE RTA : SH-3223A Printed in Vietnam ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PARTS LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Q’ty A Top C E Sketch NO Description Q’ty 1 B Side panel (L-R) 2 Bottom panel 1 D Adjustable shelf 2 Back panel 1 F Connecter 2 Sketch HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging.
STEP 1 Attach Top (A) and bottom panel (C) to side panels (B) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (4). STEP 2 Slide back panels (E) into the grooves as shown below. Remove the paper strip and attach sticky side of the connecters (F) to the back of the unit. Then attach connecter (F) to the top (A) and bottom panel (C) with screws (9) as show below. Tighten with a screwdriver. Printed in Vietnam ITEM NO.
STEP 3 Attach brackets (5) to the unit. Place the shelves (D) on the brackets and attach with screws (6). Tighten with a screwdriver. Attach steel bands (8) to the unit with screws (6) and attach steel bands (8) to the wall with screws (7) as shown below (to secure the product and prevent tipping). Tighten with a screwdriver. Printed in Vietnam ITEM NO.
