Instructions / Assembly

ITEM NO. : SH-3223A
REVISED FEB 24, 2016
Printed in Vietnam
- 4 -
STEP 1
Attach Top (A) and bottom panel (C) to side panels (B) with bolts (1), and washers (2) and (3) as
shown below. Tighten with Allen key (4).
STEP 2
Slide back panels (E) into the grooves as shown below.
Remove the paper strip and attach sticky side of the connecters (F) to the back of the unit. Then
attach connecter (F) to the top (A) and bottom panel (C) with screws (9) as show below. Tighten with
a screwdriver.