ASSEMBLY INSTRUCTIONS Description Item No. : STORAGE CHEST 29 IN : TC-929 Printed in Vietnam ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Qty A Top panel B C Sketch NO Description Qty 1 D Front panel 1 Back panel 1 E Side panel (L&R) 2 Support bottom panel 2 F Bottom panel 1 Sketch HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging.
STEP 1 Attach Back panel (B) and Front panel (D) to Side panel (E) with Bolts (1), and washers (2), (3), Tighten with Allen key (7). Attach Support bottom panel (C) to Back and front panel with Screw (6) as shown below. Tighten with a screwdriver. Printed in Vietnam ITEM NO.
STEP 2 Slide Bottom panel (F) into groove of the unit as shown below. Then attach Side panel (E) to the unit with bolts (1), washers (2) and (3). Tighten with Allen key (7). Attach top (1) to the unit with screw (5) as shown below. Tighten with a screwdriver. STEP 3 Attach Hinges (4) to the unit with Screws (5) as shown below. 4 Printed in Vietnam ITEM NO.
