User's Manual

Enrollment Station Installation Instructions
Determining the USB COM port number
When you connect the Enrollment Station to your computer's USB port, the PC automatically assigns it a COM port number. You
must then select this COM port in the software to communicate to your Enrollment Station. Follow the instructions below to
determine the USB COM port number and refer to the Hub Manager Professional documentation for details about selecting the COM
port in the software. Note: These instructions are for a typical Windows XP system. If you are using a different operating system, or
these steps do not match your PC, please refer to the instructions for your system.
1. Right click on the My Computer icon on your desktop and select properties from the drop down list.
2. When the System Properties screen opens select the Hardware tab, then click on the Device Manager button.
Page 8 of 10 Document # 6045680 Rev. 2.0, D2c
Note: If you do not have the My Computer icon on your desktop, you can access the System
Properties by going to Control Panel. Click on the Windows Start Menu and choose Settings,
then Control Panel. When the Control Panel menu opens, scroll down to System. Double-click on
System to open. Follow the rest of the instructions in this section.