Operation Manual

66 User Manual
♦ Weight (with external bracket) : 600 gr. (plotter with INTERNAL GPS Receiver)
550 gr. (plotter with EXTERNAL SMART GPS Receiver)
When the package containing the chart plotter is first opened, please check it for
the following contents (if any parts are missing contact the dealer the chart plot-
ter was purchased from):
♦ Bracket
♦ Chart plotter's protective cover
♦ Fuse 2 Amp. + fuseholder
♦ User Manual
♦ Flush mounting kit (ONLY on chart plotter with EXTERNAL SMART GPS Receiver)
♦ Smart DGPS WAAS Receiver with cable 15 mt/45 feet (ONLY on chart plotter
with EXTERNAL SMART GPS Receiver)
C-CARD INSERTING/REMOVING PROCEDURE
Inserting the C-CARD
Remove the front cover as explained in the following figure. Hold the C-CARD by
the long inclined side so that you can see the C-MAP label. Gently push the C-CARD
into the slot; push the C-CARD in as far as it will go to hold fixed into the slot and
place the front cover again.
Removing the C-CARD
Remove the front cover and eject the C-CARD you wish to remove out of the slot.
CHART PLOTTER DIMENSIONS