Enterprise Telephone Model 98390 OPERATING INSTRUCTIONS
This Interquartz telephone has been manufactured to very high standards and is very easy to use. Please read this manual carefully to find out how to use the features. Contents 1. Important Notes ......................................................................................... 2 Intended use ........................................................................................................................ 2 Telephone facilities ..................................................................
1. Important Notes Intended use This apparatus is intended for use on 2 wire analogue PSTN and PABX circuits within Europe.
REN number The Ren number of this telephone is 1. If you wish to connect any other equipment to the line, simply add the REN numbers of each piece together and ensure that the total does not exceed 4. If too many phones are connected to the line, the circuit may be overloaded and your telephone may not ring. Not all telephones have the same REN.
2. Installation This telephone is designed to plug straight into a modular style socket. If you do not have one of these sockets, they can be obtained from your Network Supplier. Connection Insert the line cord into the socket. Set the ringer volume control, as desired. Wall mounting Using the template supplied, position it where you want to fix your telephone. Drill two holes and fix roundheaded screws, leaving them slightly proud of the surface.
To enable the handset to be supported in the cradle when the phone is mounted on the wall, follow the procedure shown in Figure 3 to reverse the HANDSET RETAINER. 1. Use your thumb to press the HANDSET RETAINER 2. Push the HANDSET RETAINER out of the slot 3. Turn the HANDSET RETAINER 180° 4.
3. Telephone Features Ringer Indicator Flashes when the telephone rings with an incoming call. Ringer Volume Switch Located on the base of the unit (see Figure 4). Move switch to select no sound (OFF), muted sound (LOW) or full sound (HIGH) for ringing on incoming call. LINE . . TBR TIMED BREAK / EARTH RECALL SWITCH S1 S2 N .
Mute Button Pressing and releasing this button cuts off the handset so that the caller cannot hear your conversation. The red LED on mute button will light indicating that the mute is on. Pressing and releasing the button a second time will cancel the mute and return to normal conversation. If the telephone handset is replaced on the cradle with the mute "on", the mute will automatically be released when the handset is next lifted.
For servicing and replacement, you can purchase a suitable headset through an INTERQUARTZ approved distributor or call + 44 (0) 161 763 3122 or email sales@interquartz.co.uk. Pause Function The Pause command may be used if the phone is connected to certain types of PABX or to any network where a pause is required. Note: No more that 3 pauses should be inserted consecutively, otherwise the telephone may not function properly.
5. PABX & System Usage This telephone can be used behind a PABX or on a network that utilizes the recall function. There are many such systems and whilst it is likely that no problems will be encountered, it cannot be guaranteed that the telephone will operate correctly under all circumstances and any cases of difficulty should be referred to your supplier. Recall Before you attempt to change the recall switch, labelled TBR ER, see (Figure 4&5 ), you should disconnect the phone from the network.
Voice messaging When used behind a PABX, this telephone will respond to voice messaging systems on many PABX types, giving a visual signal of a message waiting. Your telephone manager will be aware of which system is relevant to your organisation and will adjust or advise you on the adjustment of your telephone accordingly. This adjustment is carried out by means of a switch, labelled N/S2/S1 , located next to the recall switch, mentioned above. As supplied, the telephone is set to the N (normal) position.
6. Maintenance and Problem Solving Your telephone is a precision electronic instrument. Avoid rough handling and extreme temperatures. Use a mild detergent and a damp cloth when cleaning. Never use a stronger cleaner. If your telephone does not appear to be working correctly, please check the following : No Dialling tone - Is phone cord properly connected to the wall socket ? Will not ring - ringer switch is set to off ? - REN number may exceed 4, for all telephones connected to the line.
7. Warranty and Service This product is guaranteed, by Interquartz (UK) Limited, for six years from the date of manufacture. Every Interquartz telephone has a unique serial number and part of that number refers to the date of manufacture. A label, similar to that shown below is affixed to each telephone 0510 030852 (model no) The figure 0510 means that the telephone was made during week 10 (12 March) 2005. The six year warranty, cover will apply until 12 March 2011.
Make sure that you tell us what is wrong with the phone. DO NOT FORGET TO INCLUDE YOUR OWN NAME AND ADDRESS. We ask that you bear the cost of returning the telephone to us. We will return it to you, at our expense. This warranty is in addition to any statutory rights. For further advice visit our Website www.interquartz.co.
This telephone is approved to EEC directive 1999/5/EC Distributed in the United Kingdom by Interquartz (UK) Limited Manufactured by International Quartz Limited 3C39001-HS12B A Subsidiary of Chiaphua Industries Ltd. ©Copyright INTERNATIONAL QUARTZ LTD.
