Instructions

Intesis

BACnet Server – DALI User Manual r1.1 EN

This information is subject to change without notice

URL https://www.intesis.com

154 / 172

9 Set-up process and troubleshooting

Pre-requisites

It is necessary to have a BACnet IP or MSTP client device (BMS side device) operative and properly connected to

the corresponding port of the gateway. It is also required to have a DALI installation connected to the gateway, in its

respective DALI port/s.

Connectors, connection cables, PC for the usage of the Configuration Tool and other auxiliary material, if needed,

are not supplied by Intesis for this standard integration.

Items supplied with this product for this integration are:

• Intesis gateway.

• Link to download the configuration tool.

• USB Console cable to communicate with Intesis.

• Product documentation.

Intesis MAPS. Configuration & monitoring tool for Intesis BACnet series

9.2.1 Introduction

Intesis MAPS is a Windows

compatible software developed specifically to monitor and configure Intesis BACnet

series.

The installation procedure and main functions are explained in the Intesis MAPS User Manual. This document can

be downloaded from the link indicated in the installation sheet supplied with the Intesis device or in the product

website at www.intesis.com

In this section, only the specific case of DALI to BACnet will be covered.

Please check the Intesis MAPS user manual for specific information about the different parameters and how to

configure them.

9.2.2 Connection

To configure the Intesis connection parameters press on the Connection button in the menu bar.