Instructions

Intesis

BACnet Server – DALI User Manual r1.1 EN

This information is subject to change without notice

URL https://www.intesis.com

157 / 172

Figure 9.3 Intesis MAPS Signals tab

9.2.5 Sending the configuration to Intesis

When the configuration is finished, follow the steps to program the gateway.

1.- Click on Save button to save the project to the project folder on your hard disk (more information in Intesis

MAPS User Manual).

2.- You will be prompted to generate the configuration file to be sent to the gateway.

a.- If Yes is selected, the file containing the configuration for the gateway will be generated and saved

also into the project folder.

b.- If NO is selected, remember that the binary file with the project needs to be generated before the

Intesis starts to work as expected.

3.- Press the Send File button to send the binary file to the Intesis device. The process of file transmission

can be monitored in the Intesis Communication Console window. Intesis will reboot automatically once the

new configuration is loaded.