Instructions

Intesis
TM
BACnet Server – DALI User Manual r1.1 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
164 / 172
Create project
You will need to create a new project, to do so, select ‘Create New project’ in MAPS start screen, and choose the
appropriate template according to your device model (1 or 2 DALI channels):
Figure A.1 New project creation
Device declaration in project
Once new project has been created, DALI devices can be added to the configured project, without the need of
scanning them in bus.
As mentioned above, this allows defining its configuration parameters (preset values, groups, scenes, …) before
having actual access to the installation.
To do so, go to the ‘Configuration’ tab of MAPS, and select the ‘DALI’ section.
In it, choose the channel where you want to instantiate the devices (A or B are possible in case of having the product
version supporting 2 DALI channels), then select ECG node to add new ballasts, or select Sensors node to add new
sensors.