Instructions

Intesis
TM
BACnet Server – DALI User Manual r1.1 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
17 / 172
6 Objects
Supported Object Types
The objects supported are shown in the table below.
Object Type
ID
Supported
Management Point
Analog-Input
0
Uyxx_Ballast Status
Uyxx_Actual Level
Uyxx_Device Type
Uyxx_Physical Minimum Level
Uyxx_Min Level
Uyxx_Max Level
Uyxx_Power On Level
Uyxx_System Failure Level
Uyxx_Fade Time
Uyxx_Fade Rate
Uyxx_Failure Status
Uyxx_Emergency Mode
Uyxx_Emergency Status
Uyxx_Emergency Battery Charge
Uyxx_Next Function Test
Uyxx_Next Duration Test
Uyxx_Function Test Interval
Uyxx_Duration Test Interval
Uyxx_Test Execution Timeout
Uyxx_Prolong Time
Uyxx_Duration Test Result
Uyxx_Lamp Total Operation Time
Uyxx_Emergency Level
Uyxx_Emergency Min Level
Uyxx_Emergency Max Level
Uyxx_Rated Duration
Uyxx_Features
Uyxx_Lamp Emergency Time
Uyxx_Failure Status
Uyxx_Gear Type
Uyxx_Possible Operating Modes
Uyxx_Features
Uyxx_Operating Mode
Uyxx_Fast Fade Time
Uyxx_Min Fast Fade Time
Analog-Output
1
Uyxx_Arc Power Level
Uyxx_Go to Scene
Uyxx_Store Current Lvl as Scene
Uyxx_Clear/Remove Scene
Uyxx_Add to DALI Group
Uyxx_Remove from DALI Group
Uyxx_Set Fade Time
Uyxx_Set Fade Rate
Uyxx_Set Min Level
Uyxx_Set Max Level
Uyxx_Set Power-on Level
Uyxx_Set System-failure Level
Uyxx_Store T. Execution Timeout
Uyxx_Store Prolong Time
Uyxx_Store Function T. Interval
Uyxx_Store Duration T. Interval
Uyxx_Store Emergency Level
Uyxx_Store Fast Fade Time
Gyxx_Arc Power Level
Gyxx_Go to Scene
Gyxx_Store Current Lvl as Scene
Gyxx_Clear/Remove Scene
Gyxx_Set Fade Time
Gyxx_Set Fade Rate