Instructions

Intesis

BACnet Server – DALI User Manual r1.1 EN

This information is subject to change without notice

URL https://www.intesis.com

170 / 172

Figure A.9 Example of scan results

After scan is done, total number of found devices will be shown in ‘DALI Network:’ label. Note that type column will

fill only if device has a short address assigned, if not, type cannot be read.

Next step is associating a short address between 0 to 63 to each found ballast. To do so, following options are

possible:

1. Identify the device in the installation with the Wink button, and then double click in short address field of the

device in DALI Network window, and assign it an address 0..63.

2. Use the Auto Addr. Button to automatically assign a correlative address to each ballast.

Address of each ballast can be deleted at any time, using button Delete Addr. Multiple selection is possible (using

Shift and Control keys together with mouse-clicks).

5CB6A9

B9F4AF