Instructions

Intesis
TM
BACnet Server – DALI User Manual r1.1 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
18 / 172
Gyxx_Set Min Level
Gyxx_Set Max Level
Gyxx_Set Power-on Level
Gyxx_Set System-failure Level
By_Arc Power Level
By_Go to Scene
By_Store Current Level as Scene
By_Clear/Remove Scene
By_Set Fade Time
By_Set Fade Rate
By_Set Min Level
By_Set Max Level
By_Set Power-on Level
By_Set System-failure Level
Analog-Value
2
Averaging
18
Binary-Input
3
Uyxx_Ballast / Lamp Failure
Uyxx_Dimming Curve
Uyxx_Reference Running
Uyxx_Current Protector
Binary-Output
4
Uyxx_Arc Power Off / On
Uyxx_Step Down / Up
Uyxx_Recall Min Level
Uyxx_Recall Max Level
Uyxx_Rest
Uyxx_Inhibit
Uyxx_Re-Light/Reset Inhibit
Uyxx_Start Function Test
Uyxx_Start Duration Test
Uyxx_Stop Test
Uyxx_Reset Function T. Done Fl.
Uyxx_Reset Duration T. Done Fl.
Uyxx_Reset Lamp Time
Uyxx_Reference System Power
Uyxx_Enable/Disable Curr. Prot.
Uyxx_Select Dimming Curve
Gyxx_Arc Power Off / On
Gyxx_Step Down / Up
Gyxx_Recall Min Level
Gyxx_Recall Max Level
By_Arc Power Off / On
By_Step Up / Down
By_Recall Min Level
By_Recall Max Level
Binary-Value
5
Uyxx_Update All ECG Status
Calendar
6
Command
7
Device
8
Device INBACDAL---0000
Event-Enrollment
9
File
10
Group
11
Life-Safety-Point
21
Life-Safety-Zone
22
Loop
12
Multistate-Input
13
Multistate-Output
14
Multistate-Value
19
Notification-Class
15
Program
16
Schedule
17