Instructions

Intesis

BACnet Server – M-Bus User Manual r1.6 eng

This information is subject to change without notice

URL https://www.intesis.com

34 / 40

7 Set-up process and troubleshooting

Pre-requisites

It is necessary to have a M-Bus installation, device or interface operative and well connected to the corresponding

M-Bus port of Intesis and a BACnet MSTP Master or BACnet IP client connected to their corresponding ports as well.

Connectors, connection cables, PC to use the configuration tool and other auxiliary material, if needed, are not

supplied by HMS Industrial Networks S.L.U for this standard integration.

Items supplied by HMS Networks for this integration are:

• Intesis gateway.

• Link to download the configuration tool.

• Product documentation.

Intesis MAPS. Configuration & monitoring tool for Intesis BACnet series

7.2.1 Introduction

Intesis MAPS is a Windows

compatible software developed specifically to monitor and configure Intesis BACnet

series.

The installation procedure and main functions are explained in the Intesis MAPS User Manual. This document can

be downloaded from the link indicated in the installation sheet supplied with the Intesis device or in the product

website at www.intesis.com

In this section, only the specific case of BACnet to M-BUS systems will be covered.

Please check the Intesis MAPS user manual for specific information about the different parameters and how to

configure them.

7.2.2 Connection

To configure the Intesis connection parameters press on the Connection button in the menu bar.

Figure 7.1 MAPS connection