Instructions

Intesis

BACnet Server – M-Bus User Manual r1.6 eng

This information is subject to change without notice

URL https://www.intesis.com

5 / 40

Description

Introduction

This document describes the integration of M-Bus meters with BACnet ASHRAE 135 – 2001 Annex J - BACnet

protocol compatible devices or systems using the gateway Intesis BACnet/IP Server - M-Bus.

The aim of this integration is to make accessible M-Bus devices signals and resources from a BACnet based control

system or device, as if it was a part of the own BACnet system and vice-versa.

The gateway acts as a BACnet/IP Server or BACnet MSTP device in its BACnet interface, allowing other BACnet

devices to perform subscription (COV) requests and reads/writes to its internal points. From the M-Bus point of view,

Intesis acts as a M-Bus master device (EN-1434-3), the readings of the M-Bus slave device(s) are performed by

Intesis by automatic continuous polling.

Intesis incorporates an embedded M-Bus level converter, so no extra hardware is required.

Configuration is carried out using the configuration software Intesis

MAPS.

This document assumes that the user is familiar with BACnet and M-Bus technologies and their technical terms.

Integration of MBUS devices

to BACnet IP or MSTP control and monitoring systems