Instructions

Intesis
TM
BACnet Server – PROFINET User Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
39 / 46
8. Status LEDs and push buttons
LED
Colour
Indication
Run
Off
No power
Green
Device powered and working.
Error
Off
No error
Red
Error
Port A (Tx/Rx) – BACnet
Off
There is no activity on this port.
Tx - Blinking green
Every data packet sent to the network it
blinks
Rx – Blinking yellow
Every data packet received from an
slave device it blinks
Port B (Tx/Rx) – Expansion Module
communication
Off
There is no activity on this port.
Tx - Blinking green
Every data packet sent to Expansion
module it blinks.
Rx – Blinking yellow
Every data packet received from
Expansion module it blinks.
Button A – BACnet
Off / Red
On when link is detected:
- BACnetIP: ethernet is up & running,
the IBOX got an IP
- BACnetMSTP: token passing is
detected
Button B – Expansion Module
communication
Off / Red
It indicates the state of the Anybus
CompactCom internal FSM:
- Steady: PROCESS_ACTIVE
- Blinking: WAIT_PROCESS
- Off: Other states
Push button
Functionality
Button A – BACnet
Sends to Broadcast I-Am message
Button B – Expansion Module
communication
It doesn’t have any functionality. It can be configured from Intesis MAPS
software