Instructions

Intesis
TM
KNX – Modbus Master User Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
13 / 19
5 Status LEDs
Find below information regarding LEDs present in the device.
LED
Colour
Indication
KNX Programing Mode (L1)
Off
Device isn’t in programing mode on KNX
Blinking red
Device is in programing m ode on KNX
Power (L2)
Off
No power
Green
Device powered and working.
Port A activity (L3)
Off
There is no answer from Slave devices.
Blinking green
Every valid answer received from a
Slave device it blinks.
Port A communication (L4)
Red
There is no communication with any of
the configured slave devices.
Green
There is communication with at least
one of the configured slave devices.
L1
L2
L3
L4