Instructions

Intesis

KNX – Modbus Master User Manual r1.0 eng

This information is subject to change without notice

URL https://www.intesis.com

18 / 19

Set-up procedure

1. Install Intesis in the desired installation site. Installation can be on a stable not vibrating surface.

2. Connect the KNX communication cable coming from the KNX network to the port marked as KNX Port on Intesis

(More details in section 4).

3. Connect the communication cable coming from the EIA485 port of the Modbus RTU installation to the port

marked as Port A of Intesis (More details in section 4).

4. Open ETS, open a project and add product from ETS catalog.

5. Modify the configuration as desired, and then download to the device.