Instructions

Intesis
TM
KNX – Modbus Master User Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
8 / 19
Points definition
Every internal datapoint to define has the following KNX properties:
Property
Description
Object name
Descriptive information about the Communication Object or Signal.
DPT
It is the KNX data type used to code the signal's value. It will depend on the type of
signal associated in the external system in every case. In some integrations, it is
selectable, in others it is fixed due to the intrinsic characteristics of the signal.
Active
If activated, the point will be active in Intesis gateway, if not, the behaviour will be as if
the point is not defined. This allows deactivating points without the need of delete them
for possible future use.