Instructions

Intesis
TM
KNX – Mitsubishi Electric A.C.
User's manual r17.0 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
14 / 32
Figure 4.6 Parameter detail
4.2.7 Enable use of Legacy_ object for Mode
This parameter shows/hides the Legacy_ Mode communication object
o If set to “no” the communication object will not be shown.
o If set to “yes” the Legacy_ Mode communication object will appear. This object lets
change the indoor unit mode but it uses a different data type. It is used to maintain
compatibility with old gateway models.
4.3 Fan Speed Configuration dialog
Figure 4.7 Default Fan Speed Configuration dialog
All the parameters in this section are related with the Fan Speed properties and
communication objects.
4.3.1 Fan is accessible in Indoor unit
This parameter lets choose if the unit has Fan Speed control available or not.