Instructions

Intesis
TM
KNX – Mitsubishi Electric A.C.
User's manual r17.0 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
17 / 32
4.3.7 Enable use of Text object for Fan Speed
This parameter shows/hides the Status_ Fan Speed Text communication object.
o If set to “no” the object will not be shown.
o If set to “yes” the Status_ Fan Speed Text object will appear. Also, in the
parameters, will be shown five text fields, one for each Fan Speed, that will let
modify the text string displayed by the Status_ Fan Speed Text when changing a fan
speed.
Figure 4.13 Parameter detail
4.3.8 Enable use of Legacy_ object for Fan Speed
This parameter shows/hides the Legacy_ Fan Speed communication object
o If set to “no” the communication object will not be shown.
o If set to “yes” the communication object will appear. This object lets change the
indoor unit fan speed but it uses a different data type. It is used to maintain
compatibility with old gateway models.
4.4 Vanes Up-Down Configuration dialog