Instructions

Intesis
TM
KNX – Mitsubishi Electric A.C.
User's manual r17.0 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
18 / 32
Figure 4.14 Vanes Up-Down Configuration dialog
All the parameters in this section are related with the Vanes Up-Down properties and
communication objects.
4.4.1 Indoor unit has U-D Vanes
This parameter lets choose if the unit has Up-Down Vanes available or not.
Figure 4.15 Parameter detail
o If set to “no” all the parameters and communication objects for the Up-Down Vanes
will not be shown.
o If set to “yes” all the parameters and communication objects (if enabled in the
parameters dialog) for the Up-Down Vanes will be shown.
Important: Read the documentation of your indoor unit to check if Up-Down Vanes are
available.
4.4.2 Available positions in Indoor Unit
This parameter lets choose how many vane positions are available in the indoor unit.
Figure 4.16 Parameter detail
Important: Read the documentation of your indoor unit to check how many vane
positions are available.
4.4.3 Indoor unit has AUTO Vanes U-D
This parameter lets choose if the indoor unit has Auto Vanes U-D available or not.