Instructions

Intesis
TM
KNX – Mitsubishi Electric A.C.
User's manual r17.0 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
21 / 32
This parameter shows/hides the Control_ Vanes U-D Man/Auto and Status_ Vanes U-D
Man/Auto communication objects.
o If set to “no” the objects will not be shown.
o If set to “yes” the Control_ Vanes U-D Man/Auto and Status_ Vanes U-D Man/Auto
objects will appear.
• When a “1” value is sent to the Control_ communication object, Vanes Up-
Down will be in Auto mode, and the Status_ object will return this value.
• When a “0” value is sent to the Control_ communication object, Vanes Up-
Down will be in Manual mode and the first position will be enabled. The
Status_ object will return this value.
Important: When in Auto Mode the indoor unit will choose the most
appropriate vane up-down position, but this will be shown neither in KNX nor
in the remote controller.
4.4.9 Enable use of Text object for Vane U-D
This parameter shows/hides the Status_ Vanes U-D Text communication object.
o If set to “no” the object will not be shown.
o If set to “yes” the Status_ Vanes U-D Text object will appear. Also, in the
parameters will be shown seven text fields, five for the Vane Position and one for the
Auto function and another one for the Swing function, that will let modify the text
string displayed by the Status_ Vanes U-D Text when changing a vane position.
Figure 4.20 Parameter detail
4.4.10 Enable use of Legacy_ object for Vanes
This parameter shows/hides the Legacy_ Vanes communication object