Instructions

Intesis

KNX – Mitsubishi Electric A.C.

User's manual r17.0 EN

This information is subject to change without notice

URL https://www.intesis.com

7 / 32

3. Configuration and setup

This is a fully compatible KNX device which must be configured and setup using standard

KNX tool ETS.

ETS database for this device can be downloaded from:

https://intesis.com/products/ac-interfaces/mitsubishi-electric-gateways/mitsubishi-electric-domestic-mr.slim-

and-city-multi-to-knx-interface

Please consult the README.txt file, located inside the downloaded zip file, to find

instructions on how to install the database.

Important: Do not forget to select the correct settings of AC indoor unit being

connected to the INKNXMIT001I000. This is in "Parameters" of the device in ETS.