Instructions

Intesis

KNX – IR Universal AC

User's manual r1.3 EN

This information is subject to change without notice

URL https://www.intesis.com

14 / 46

4 Configuration and setup

This is a fully compatible KNX device which must be configured and setup using standard KNX tool ETS.

Before starting with the configuration, please make sure that the binary inputs (if used) and the USB cable are

properly connected to the interface. Make sure as well, that the interface is connected to the KNX bus to allow

the proper download of the KNX programming.

To proceed with the configuration and setup, it is recommended to follow instructions next:

1. Download and install the latest version of the ETS data base (5 ETS Parameters and Configuration).

2. Open the product’s plugin.

3. Select your AC brand and model.

4. Download the infrared configuration to the Intesis pushing on the “Download IR parameters”.

NOTE: Check the current connection to the Intesis. Notice that to send the Infrared configuration, you

can use the standard KNX connection (the same used to program the device) or a USB connection. For

this purpose, a mini USB port is available by opening the device.

USB connection is faster than KNX connection. Notice that USB is only available for the IR

parameters download (see 5.1 General configuration).

5. Proceed with the rest of AC unit settings and other parameters in the plugin tab.

6. Finish the KNX programming: communication object links and device addressing.

7. Download the configuration to the device as usual KNX device.