Instructions

Intesis
TM
KNX – IR Universal AC
User's manual r1.3 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
16 / 46
General configuration
The main view of this tab is the showed in the next figure. Parameter description will follow next:
Figure 5.2 General parameters
Configuration of the AC model
There are two possibilities to configure the AC model to control through INKNXUNI001I000: doing a manual
configuration, by including the AC brand and unit model, or doing an automatic configuration, by using Auto
Learn. To use the last option, it is mandatory the IR remote controller of the AC unit.
5.1.1 Manual configuration: AC brand and model
Use the dropdown menus to select the brand and model of the AC unit to control.
In case your AC unit brand or model were not available in the list, please select the INKNXUNI001I000 and
contact our support department for more information about the settings to select.
5.1.2 Automatic configuration: Auto Learn
The auto learn function is available for INKNXUNI001I000 using 1.1 application program version or newer. This
function allows to identify the infrared remote control automatically by only sending a command pointing to the
KNX device. Please note that internet connection is required for this function.
To launch the function, press the button “Auto Learn” and follow the instructions given in the pop-up window:
AC brand
AC unit model