Instructions

Intesis
TM
KNX – IR Universal AC
User's manual r1.3 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
7 / 46
2 Quick setup
Figure 2.1 INKNXUNI001I000 integration example
1. Check the interface location that best fits the installation (More at 3.1 LOCATION SELECTION)
2. Connect the interface to the KNX bus.
3. Download the ETS database for this product, import it and add it to the current ETS project.
4. Access the parameter section of the Intesis device. Notice that parameters for this interface are
configured through a specific plugin (5 ETS PARAMETERS AND CONFIGURATION).
5. Select the communication objects to be used and other parameters. This step can be omitted if working
with the default objects and parameters.
6. Save the configuration file and download the application program.
7. Close the plugin and apply changes when asked.
8. Link the group address from the communication object of the KNX device with the communication object
inside the Intesis interface.
9. Download the ETS parameters as with any other standard KNX device.