Instructions

Intesis
TM
KNX – IR Universal AC
User's manual r1.3 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
8 / 46
3 Device Installation
Location selection
Determining that the Intesis device will be working as expected in the installation location is an important stage.
To determine the best location for your Intesis device, use the Wireless Controller (the one of your AC unit).
When selecting the installation location, please keep in mind that the Intesis device has 2 IR emitters and 1 IR
receiver. The 2 emitters increase the installation possibilities allowing many different suitable positions for the
device location. On the other hand, the receiver offers the possibility to get the feedback from the IR wireless
remote controller so the KNX status objects can be updated with that feedback.
Figure 3.1 IR emitters and IR receiver location
IR reception area
IR transmission area