Instructions

Intesis
TM
INMBSDAI001I000
User’s Manual r2.3 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
5 / 22
1. Presentation
The INMBSDAI001I000 interface allows a complete and natural integration of
Daikin air conditioners into Modbus RTU (EIA-485) networks.
Compatible with Domestic line models.
Reduced dimensions. 93 x 53 x 58 mm
3.7” x 2.1” x 2.3”
• Quick and easy installation.
Mountable on DIN rail, wall, or even inside the indoor unit on some models of AC.
• External power not required.
• Direct connection to Modbus RTU (EIA-485) networks. Up to 63 INMBSDAI001I000
devices can be connected on the same network.
INMBSDAI001I000 is a Modbus slave device.
• Direct connection to the AC indoor unit. Up to 1 AC indoor units can be connected to
INMBSDAI001I000. The cable for this connection is also supplied.
• Configuration from both on-board DIP-switches and Modbus RTU.
• Total Control and Supervision.
• Real states of the AC unit's internal variables.
• Allows simultaneous use of the AC’s remote controls and Modbus RTU.
* Up to 63 Intesis devices can be installed in the same Modbus RTU bus. However, depending on the configured speed, the
installation of Modbus Repeaters may be required
• SCADA
• PLC
• DDC
• BMS
• HMI
• Controller
• etc
Up to 63
AC indoor
units*
Modbus RTU
EIA-485 network
Modbus RTU
Master
device
INMBSDAI001I000
INMBSDAI001I000
INMBSDAI001I000